Image 1 of 7
Image 2 of 7
Image 3 of 7
Image 4 of 7
Image 5 of 7
Image 6 of 7
Image 7 of 7
Desk Top Pneumatic Sit/Stand Riser and Keyboard Tray
Overview
The EZRISER36 is a standing desk converter that lets you move between sitting and standing throughout the day without modifying your desk. A gas mechanism drives stepless height adjustment — squeeze the side handles and the platform glides smoothly to any position from 115 mm to 500 mm. The unit sits directly on your existing desk surface, so setup takes minutes with no clamps or tools required. A full-width keyboard tray keeps your keyboard and mouse at a comfortable working height below the main surface, while an embedded groove holds a tablet or phone within reach. The 950 × 400 mm work surface supports up to 15 kg (33 lbs), giving wider setups room for a laptop, monitor, and accessories side by side.
Key Features
Feature Detail
Gas-Assisted Height Adjustment
A gas hydraulic mechanism counterbalances the weight of the platform and everything on it, so shifting between sitting and standing is one smooth motion instead of a fight against resistance. Squeeze the release handles and the platform moves freely through its full range; let go and it holds firmly at whatever height you prefer. Because the adjustment is stepless rather than locked to preset positions, you can fine-tune the height to your exact posture rather than settling for the nearest notch. It’s a mechanism built for repeated daily use, holding its feel over years of transitions without re-tensioning or maintenance.
Freestanding Setup
The riser sits directly on top of your existing desk — no clamps to tighten, no holes to drill, no permanent changes to your workspace. That makes it a practical option for rented spaces, shared desks, or standing desk frames where additional hardware isn’t an option. Because nothing attaches to the desk itself, the entire unit can be lifted and relocated to another surface in seconds, whether that’s a different desk in the same office or a different room entirely. Setup is a one-person job from the moment it’s unboxed.
Built-In Keyboard Tray
A lower-tier tray keeps your keyboard and mouse at a separate, ergonomic working height from your monitor or laptop surface above — the same layered setup recommended for reducing wrist and shoulder strain during long typing sessions. Because the tray is integrated into the riser itself, it rises and lowers together with the main surface, so the relative position between typing height and screen height stays consistent at every setting. There’s no separate tray to install, align, or purchase as an accessory; it’s part of the platform from the first setup.
Specifications
| Parameter | Value |
|---|---|
| Work Surface Dimensions | 950 × 400 mm (37.4″ × 15.7″) |
| Work Surface Thickness | 16 mm (0.63″) |
| Number of Tiers | 2 |
| Height Range — Lowest Position (Sitting) | 115 mm (4.5″) |
| Height Range — Highest Position (Standing) | 500 mm (19.7″) |
| Total Height Adjustment | 385 mm (15.2″) |
| Lift Mechanism | Gas Mechanism |
| Maximum Weight Capacity | 15 kg (33 lbs) |
| Material | Engineered Wood, Steel, Plastic |
| Colour | Black |
| Assembled Weight | — |
| Estimated Time to Assemble — Not Experienced | — |
| Estimated Time to Assemble — Experienced | — |
| Keyboard Tray | |
| Tray Dimensions | 945 × 300 mm (37.2″ × 11.8″) |
| Tray Height Adjustment | N/A — Fixed Height Below Top Surface |
| Box Weight | 23.6 kg (52 lbs) |
| Box Dimensions | 1200 × 680 × 150 mm (47.24″ × 26.77″ × 5.9″) |
| UNSPSC | 56101703 |
Included in the Box
Warranty and Parts
Downloads