Image 1 of 3
Image 2 of 3
Image 3 of 3
Sit/Stand Desk with Keyboard/Mouse Deck (2 Tier) — Black Finish
Overview
The EZRISERPRO is a two-tier standing desk converter built for dual-monitor setups, letting you move between sitting and standing throughout the day without modifying your desk. A gas mechanism drives stepless height adjustment — squeeze the side handles and the platform moves smoothly to any position across its full range. The unit sits directly on your existing desk surface with no clamps or grommet holes, fits desks as shallow as 610 mm (24″), and suits corner workstations. A full-width keyboard and mouse deck sits below the main surface, keeping typing height and screen height separate at every setting. The 900 × 590 mm work surface holds up to two monitors and supports up to 15 kg (33 lbs).
Key Features
Feature Detail
Gas-assisted height adjustment
A gas hydraulic mechanism counterbalances the weight of the platform and everything on it, so shifting between sitting and standing is one smooth motion instead of a fight against resistance. Squeeze the release handles and the platform moves freely through its full range; let go and it holds firmly at whatever height you prefer. Because the adjustment is stepless rather than locked to preset positions, you can fine-tune the height to your exact posture rather than settling for the nearest notch. It’s a mechanism built for repeated daily use, holding its feel over years of transitions without re-tensioning or maintenance.
Freestanding setup
The riser sits directly on top of your existing desk — no clamps to tighten, no holes to drill, no permanent changes to your workspace. That makes it a practical option for rented spaces, shared desks, or standing desk frames where additional hardware isn’t an option. Because nothing attaches to the desk itself, the entire unit can be lifted and relocated to another surface in seconds, whether that’s a different desk in the same office or a different room entirely. Setup is a one-person job from the moment it’s unboxed.
Built-in keyboard tray
A lower-tier tray keeps your keyboard and mouse at a separate, ergonomic working height from your monitor or laptop surface above — the same layered setup recommended for reducing wrist and shoulder strain during long typing sessions. Because the tray is integrated into the riser itself, it rises and lowers together with the main surface, so the relative position between typing height and screen height stays consistent at every setting. There’s no separate tray to install, align, or purchase as an accessory; it’s part of the platform from the first setup.
Specifications
| Parameter | Value |
|---|---|
| Work Surface Dimensions | 900 × 590 mm (35.4″ × 23.2″) |
| Work Surface Thickness | — |
| Number of Tiers | 2 |
| Height Range — Lowest Position (Sitting) | 145 mm (5.7″) |
| Height Range — Highest Position (Standing) | 495 mm (19.5″) |
| Total Height Adjustment | 414 mm (16.3″) |
| Lift Mechanism | Gas Mechanism |
| Maximum Weight Capacity | 15 kg (33 lbs) |
| Monitor Compatibility | Up to 2 Monitors |
| Material | Engineered Wood, Steel, Plastic |
| Colour | Black |
| Assembled Weight | 22.64 kg (49.9 lbs) |
| Estimated Time to Assemble — Not Experienced | — |
| Estimated Time to Assemble — Experienced | — |
| Keyboard Tray | |
| Tray Dimensions | 900 × 190 mm (35.4″ × 7.5″) |
| Tray Height Adjustment | N/A — Fixed 114 mm (4.5″) Below Top Surface |
| Box Weight | 23.81 kg (52.5 lbs) |
| Box Dimensions | 970 × 660 × 225 mm (38.19″ × 25.98″ × 8.86″) |
| UNSPSC | 56101703 |
Included in the Box
Warranty and Parts
Downloads